Main seal for kegs
Seal for the connection between the spigot and the keg
Two versions available for different keg types
Maintenance with tap grease recommended
1. Function of the main seal
The main seal is located on the underside of the KEG closure, directly on the spigot, and ensures that the KEG is sealed against the keg. It prevents liquid or pressure from escaping between the spigot and the keg, which is particularly important when tapping beverages such as beer or lemonade. This seal forms a vital barrier for pressure control and hygiene in the system.
2. Compatibility and variants
There are two variants of the main seal, depending on the type of KEG used. Make sure you choose the right variant for your KEG system:
-
Variant 1: Main seal for KEG type A (flat) or M (combination)
This main seal is designed for flat kegs and combination kegs. These types are the most common and are frequently found in restaurants and small breweries.
-
Option 2: Main gasket for KEG type S (basket) or D (Köpi)
This variant is intended for basket kegs and Köpi kegs. These kegs are often found in larger breweries or industrial applications where a more robust seal is required.
3. Design and function
The main seal consists of a flexible sealing material, ideally rubber-like or silicone-based, to ensure a perfect seal. It is attached to the bottom of the KEG cap and serves to perfectly seal the connection between the cap and the keg so that no liquid or gas escapes during tapping.
sealing function:
The main seal seals the KEG against the keg and prevents CO2 or the beverage from escaping uncontrollably. It ensures that the beverage remains fresh and safe even under pressure.
Maintenance function:
The seal is exposed to constant pressure and liquid contact, making it an important wearing part in the system. Regular maintenance is necessary to prevent leaks and ensure the longevity of the system.
4. Maintenance and lubrication
Since the main seal must regularly withstand pressure and fluids, it is important to maintain and lubricate it well to maintain its sealing performance.
lubrication:
It is recommended to lubricate the main seal regularly with bar tap grease. This special grease helps to keep the seal supple and reduce friction, thereby extending its service life.
inspection:
- check the seal regularly for cracks or wear that could lead to pressure loss or leaks.
- If the seal is damaged or no longer seals properly, it must be replaced immediately to ensure the system works correctly.
5. Advantages of the main seal
optimal sealing: The main seal ensures a perfect seal that prevents liquids or gases from escaping.
Durability: With proper care, the seal remains durable and functional.
Easy maintenance: Regular lubrication and inspection make the seal easy to maintain.
Reliable function: The seal is an essential component of the KEG system, ensuring that the beverage is dispensed in perfect quality and at a constant pressure.
6. Application and installation
step 1: Remove the old sealing ring if it is damaged or worn.
step 2: Select the correct version of the main seal (depending on the KEG type) and insert it into the bottom of the stem.
step 3: Ensure that the seal is seated correctly and evenly without being damaged.
step 4: Lightly lubricate the seal with tap grease to ensure smooth sliding and extend its service life.
step 5: Reassemble the KEG cap and make sure that the gasket seals correctly when the KEG cap is closed.
7. Cleaning and maintenance
regular inspection: Check the seal regularly for wear or damage.
lubrication: Use tap grease to keep the seal supple and maintain functionality.
cleaning: Carefully clean the seal with warm water and a mild detergent to remove any deposits or dirt.
replacement: If the seal is damaged or worn, it should be replaced immediately.
