Flexi-Draft is an innovative dispensing system with hygienic disposable
Beer line for dispensing systems with counter taps and mobile cooling counters.
Instead of a conventional dispensing column, you install a Flexi-Draft column.
A disposable line for the flat, basket, or draft basket system is inserted into this column
and connected to a special Flexi-Draft tap head.
You can then connect the chilled keg as usual with the tap head.
The disposable beer line has a fixed length of approx. 140 cm.
ATTENTION:
The keg remains connected to the tap head until it is completely empty. If you accidentally disconnect the tap head
you will need a new line, as the hygienic disposable function is ensured by a special mechanism in the lower part of the
Line. You should therefore always have enough disposable lines in stock to ensure continuous
Serving operation.
The Flexi-Draft disposable line has an ID of 4 mm and is suitable for most types of beer.
The pressure in the keg is reduced over the length and cross-section of the line so that, when the pressure reducer is set correctly
Pressure reducer.
Other: • A special line is currently being developed for wheat beers and will be available shortly.
• A special line is required for serving stout beer, which is not yet available.
• For kegs with combination fittings, a special line is required which is not yet available.
Herstellerinformationen:
DSI Micro Matic GmbH
Oberster Kamp 20
59069 Hamm
Nordrhein-Westfalen
Deutschland
dsi@micro-matic.com
Für diesen Artikel sind laut Hersteller keine Warnhinweise und Sicherheitsinformationen erforderlich.
There are no reviews yet.
