Beer dispenser on wheels installed in an original old solid oak wine barrel

Description

Beer dispenser on wheels installed in an original old solid oak wine barrel.
Also ideal as a bar table.

Maximum 30 liter kegs
Available in different versions

•Barrel with without active cooling
•Barrel with Flexidraft without active cooling
•Barrel with and active cooling 30l/h
•Barrel with Flexidraft with active cooling 30l/h

standard equipment
•Wine barrel made from real oak with galvanized barrel rim and removable front flap
• Type A keg closure on the side or Flexidraft keg (depending on selection)
•Co2 bottle 2kg (filled with TÜV)
•1 x beer hose 7x12mm with SK no. 5 x Flexidraft Type A Disposable Tubing
•Co² hose 7x12mm with SK no.
•Pressure reducer with level indicator 3 bar
•Barrel bottom with cut-out (fall protection)
•Round tube beer tower made of stainless steel with compensator beer tap
•Stainless steel drip tray 300x150mm
•Heavy-duty castors up to 100kg load
•Fan for flow cooler (only with active cooling)

Description dry cooler / variants with active cooling

PYGMY 25 beer dispenser 1-line dry cooling device made of stainless steel, 30 litres/h
lightweight dry cooling dispenser made of stainless steel
Tap capacity: 30 l/h
incl. stainless steel drip tray
including post-cooling compensator tap
ready to use in 2-4 minutes
Control range +2 to +10 degrees
Dry cooling dispenser 1-line
Technical values:

267 watts/ 230V/50Hz, 1.16A
Dimensions: W/D/H 170x280x325 mm
Weight: 14.5KG

Description Flexidraft systems

With FlexiDraft™ you replace the beer line with every keg change without having to clean the line. In contrast to cleaning conventional systems, which can take up to 45 minutes, replacing the beer line takes just a few seconds.

The disposable beer line is made of recyclable plastics (polypropylene, polyethylene and polyoxymethylene) and can be disposed of with normal household waste.

For even more sustainable disposal, the disposable beer line can be dismantled into the spout/tap and line. The latter can be disposed of as plastic waste via the local collection and recycling infrastructure.
This allows you to open up new business opportunities while continuing to use your existing keg equipment. The disposable beer line is connected to the keg fitting using the appropriate FlexiDraft™ coupler.

Note: Other kegs on request. Attention: This product is individually made for you in our manufactory.
A right of revocation according to § 312g Abs. 2 Nr. 1 BGB is excluded. Illustration similar.

Attention: This product is individually made for you in our manufactory.
A right of revocation according to § 312g Abs. 2 Nr. 1 BGB is excluded. Illustration similar.