Screw-on connector 1/2" female thread x 3/8" plug connector
High-quality connection solution for CO₂ and beverage lines – tool-free, safe, and quick
This screw-on connector with 1/2" Female thread and 3/8" plug connection is a particularly convenient and time-saving solution for connecting CO₂ or beverage hoses to pressure-carrying components such as pressure reducers, distributors or devices with 1/2" male threads.
It is ideal for connecting hoses with an inner diameter of 6.7 mm and an outer diameter of 9.5 mm, which are frequently used in beverage technology for CO₂ or soft drink lines.
Technical data:
-
Connection side 1: 1/2" female thread (BSP, cylindrical)
-
Connection side 2: Plug connection for 3/8" hoses (corresponds to 9.5 mm OD)
-
Material: Food-grade plastic
– robust, chemical-resistant, suitable for CO₂
-
Pressure range: Generally up to approx. 10 bar (depending on manufacturer)
-
Temperature range: Depending on the model, usually 1–65 °C
-
Suitable media: CO₂, beer, water, soft drinks (AFG), compressed air
Compatibility:
-
Suitable for:
– Hoses with an outer diameter of 9.5 mm (corresponds to 3/8" OD), e.g. with an inner diameter of 6.7 mm
– Typical CO₂ and beverage hoses made of PE, PU, or PA (hard-walled recommended)
-
Compatible with plug-in systems from:
– John Guest
– DM Fit
– Valpar, Ekoplastik, and many more
Advantages:
-
Tool-free hose assembly and disassembly
-
Tight connection without clamps or screws
-
Quick installation thanks to simple plug-in technology
-
Hygienic, food-safe, CO₂-resistant
-
Reusable (can be plugged in and out multiple times)
Notes on assembly and disassembly:
✔ Assembly (insert hose):
-
Prepare the hose:
Cut the end of the hose absolutely straight (no bevel cut!).
Only a cleanly cut hose guarantees a tight connection.
-
Insert:
Insert the hose end straight and fully into the plug connection with slight pressure until you feel resistance.
The hose locks into place – a slight pull test shows that it is securely fixed.
❗ Disassembly (detaching the hose):
-
Depressurize:
Ensure that the line is depressurized (e.g., shut off CO₂ and vent) before removing the hose.
-
Unlock:
Press the small plastic ring (release lever) located around the plug connection evenly inwards – towards the connector.
-
Pull:
Hold the ring pressed and pull the hose straight out at the same time.
The hose comes off without tools.
Typical areas of application:
-
CO₂ supply lines in dispensing systems
-
Beverage lines for soft drinks (AFG) or water
-
Home dispensing systems or professional catering
-
Mobile dispensing (e.g., festival floats)
-
Connection of lines to pressure reducers with 1/2" thread
Herstellerinformationen:
DMT Head office & Factory
77beon-gil
21694 Incheon
Südkorea
info@dmtemea.de
Angaben zur verantwortlichen Person
DMT EMEA GmbH
Franz-Brombach-Str. 11-13
85435 Erding
Deutschland
kwak@dmtemea.de
Für diesen Artikel sind laut Hersteller keine Warnhinweise und Sicherheitsinformationen erforderlich.
There are no reviews yet.
