Agitator motor with pump
including internal start-up capacitor
available in the following versions
- Version 1/ lift height 5.5 m
- Version 2 / lifting height 6 m
- Version 3 / climbing height 12 m
- Version 4 / climbing height 18 m
An agitator motor with pump and internal start capacitor is a versatile and efficient device used in various industrial applications. This combination unit integrates an electric motor, a pump, and a start capacitor in a compact housing to enable effective mixing of liquids.
How it works:
The agitator motor with pump works by converting electrical energy into mechanical energy. The motor drives the pump, which in turn sucks in and conveys liquids. This is particularly useful in areas where a homogeneous mixture of different liquids is required, such as in chemical production processes, food processing, or water treatment.
Internal start-up capacitor:
The internal start-up capacitor is an important component of this system. It serves to assist the motor during start-up by providing a temporary energy boost. This helps to achieve the required starting speed and increase the torque to set the agitator in motion. Once the motor has reached its operating speed, the starting capacitor is automatically switched off or deactivated.
Power ratings:
The agitator motor with pump is available in different power ratings to meet the requirements of different applications. Power is often measured in kilowatts (kW) or horsepower (HP) and can range from small, cost-efficient units to more powerful industrial versions.
Advantages:
Space saving: The integration of the motor, pump, and start-up capacitor in a single housing saves space and facilitates installation.
Easy handling: The combination unit allows for easy commissioning and maintenance.
Efficiency: The internal start-up capacitor improves the start-up process and reduces the load on the motor.
Versatility: Different power ratings allow adaptation to different applications.
Overall, the agitator motor with pump and internal start-up capacitor is a practical solution for companies and industries that require reliable mixing of liquids, whether in the chemical, food processing, pharmaceutical, or other industries.
Ausführung 3 / Steighöhe 18m
- Modell STB18
- Volt:220-240
- Hz: 50
- Ampere: 0,46
- Watt: 99
- Drehzahl: 2800
- Propeller:50x15°
- 2 Klingen
- Gewicht 2,5kg
- Hersteller: Saber
Maße:
- A=120
- B=223
- C=90
- Ausgang=9,5
- Steighöhe = 18 m
- Leitungsweg = 20 m
- Wellenlänge = 235 mm
- Gesamthöhe = 358 mm
| Wicklungen |
Einphasenmotor. Isolationsklasse F. Gehäuse aus |
| Motorkörper |
stranggepresstem Aluminium. |
| Schutz |
Schutzart IP 44. Eingebautes |
| Sicherheit |
thermisches Motorschutzsystem. |
| Kugellager |
Ø 8 mm NSK, SKF oder gleichwertig, in halbstarrem, geräuschdämpfendem |
| Motorwelle |
Silikongehäuse. AISI 303 INOX-Stahl Ø 8 mm. |
| Befestigungsteile |
INOX-Stahl oder korrosionsbeständige Materialien. |
| Motorteile |
Hochtemperaturbeständige Motorteile aus thermoplastischem Kunststoff. |
| Kühlsystem |
Luftgekühlte Pumpe mit einer Sauggeschwindigkeit von 2,2 m/s. Kompatibel |
| Wasseranschluss |
mit John Guest-Armaturen. |
| Betrieb |
Stromversorgung 220-240 Volt – 24 Stunden am Tag ohne Unterbrechung. Nur sauberes, nicht trinkbares |
| Vorschriften |
Wasser. Entspricht den Richtlinien EN60335-2-41:2003/A2:2010 und WEEE/RoHs. |
Herstellerinformationen:
Rick & Jülich GmbH
Vogelsanger Straße 280
50825 Köln
Nordrhein-Westfalen
Deutschland
bestellung@bieraktuell.com
Für diesen Artikel sind laut Hersteller keine Warnhinweise und Sicherheitsinformationen erforderlich.
There are no reviews yet.
