Conversion kit for Biermaxx+Draft&Fresh, Zapf Profi, Clatronic beer dispenser, Koenig BW1880 and many other devices
Are you dissatisfied with your current beer dispenser and want consistent beer pressure without always having to buy expensive 16g CO2 cartridges? The conversion kit for your dispenser offers the perfect solution! With this conversion kit, you can switch to normal CO2 cylinders and use a pressure regulator to tap beer like a pro.
The conversion kit includes:
-
Special adapter with seal and nozzle (4 mm):
- The adapter is simply screwed into the CO2 capsule holder of your dispensing system and connects it to the CO2 cylinder
- It has a seal and a 4 mm nozzle to ensure a gas-tight connection.
-
1.5 m CO2 hose (4x8 mm, opaque, with SK number):
- The CO2 hose is 1.5 meters long, which allows for convenient installation and flexible use of the CO2 cylinder
- The hose has an inner diameter of 4 mm and an outer diameter of 8 mm and is specially designed for CO2 flow
- The hose is opaque and ensures a stable CO2 supply at a constant pressure.
-
3/4" wing nut with 4 mm nozzle, seal, and 1-ear clamp for connection to the pressure reducer:
- The wing nut is used to securely connect the CO2 hose to the pressure regulator
- It includes a 4 mm nozzle and a seal that ensure a reliable and gas-tight connection
- A 1-ear clamp is included to securely fix the hose to the connection.
Installation and use:
-
Easy installation: The adapter is simply screwed into the CO2 capsule holder of your beer dispenser, making conversion quick and easy
-
Hose feed-through: Depending on the model, you may need to drill a small hole in the housing of the tap system to feed the CO2 hose to the outside. Make sure to do this precisely and safely
-
Use of CO2 cylinders: Use CO2 cylinders with a pressure regulator (not included) to operate your tap with CO2. This eliminates the need to constantly purchase CO2 cartridges.
Important information:
-
CO2 cylinder and pressure regulator are not included in this offer. These must be purchased separately. Suitable pressure regulators and CO2 cylinders as well as Biermaxx conversion kits are available in our shop
-
Tapping pressure: Make sure that the tapping pressure does not exceed 1.3 bar, as the kegs cannot withstand higher pressures and may be damaged.
With this conversion kit, you can convert your beer tap into a professional system that works with CO2 cylinders. This not only offers you a more cost-effective solution, but also the opportunity to enjoy perfectly tapped beer at any time!
Herstellerinformationen:
Gastrobedarf Westerbarkey GmbH
Schinkenstraße 10
33415 Verl
Nordrhein-Westfalen
Deutschland
kontakt@gastrodiscount.info
Für diesen Artikel sind laut Hersteller keine Warnhinweise und Sicherheitsinformationen erforderlich.
