Beer hose filling set 5/8" – 4-piece or 8-piece
For professional and hygienic hose connections in beverage lines
The beer hose nozzle set 5/8" is the ideal solution for secure and durable connections of beverage lines to standard 5/8-inch beer threads. The sets consist of high-quality, precisely fitting individual parts and are available in four different hose sizes. Depending on your requirements, a compact 4-piece or a more versatile 8-piece version is available.
Available for the following hose sizes:
Variant: 4-piece set
Ideal for simple, selective connections – contains all components required for complete hose assembly.
Scope of delivery depending on version:
4 mm version:
-
1 x wing nut 5/8"
-
1 x grommet (straight or bent) for 4 x 8 mm hose
-
1 x clear flat seal for hose connector
-
1 x 1-ear clamp for 4 x 8 mm hose
6.7 mm version:
-
1 x wing nut 5/8"
-
1 x nozzle (straight or curved) for 6.7 x 9.5 mm hose
-
1 x clear flat seal for hose nozzle
-
1 x 1-ear clamp for 6.7 x 9.5 mm hose
7 mm version:
-
1 x wing nut 5/8"
-
1 x nozzle (straight or curved) for 7 x 12 mm hose
-
1 x clear flat gasket for hose nozzle
-
1 x 1-ear clamp for 7 x 12 mm hose
10 mm version:
-
1 x wing nut 5/8"
-
1 x hose connector (straight or curved) for 10 x 15/16 mm hose
-
1 x clear flat seal for hose nozzle
-
1 x 1-ear clamp for 10 x 15/16 mm hose
Variant: 8-piece set
Ideal for maximum flexibility – with straight and curved hose connectors for variable installation situations.
Scope of delivery depending on version:
4 mm version:
-
2 x wing nuts 5/8"
-
1 x straight nozzle for 4 x 8 mm hose
-
1 x curved nozzle for 4 x 8 mm hose
-
2 x clear flat seals
-
2 x 1-ear clamps for 4 x 8 mm hose
6.7 mm version:
-
2 x wing nuts 5/8"
-
1 x Straight nozzle for 6.7 x 9.5 mm hose
-
1 x bent hose connector for 6.7 x 9.5 mm hose
-
2 x clear flat gaskets
-
2 x 1-ear clamps for 6.7 x 9.5 mm hose
7 mm version:
-
2 x wing nuts 5/8"
-
1 x Straight hose connector for 7 x 12 mm hose
-
1 x bent hose connector for 7 x 12 mm hose
-
2 x clear flat gaskets
-
2 x 1-ear clamps for 7 x 12 mm hose
10 mm version:
-
2 x wing nuts 5/8"
-
1 x Straight nipple for 10 x 15/16 mm hose
-
1 x bent nipple for 10 x 15/16 mm hose
-
2 x clear flat gaskets
-
2 x 1-ear clamps for 10 x 15/16 mm hose
Processing instructions
-
Insert the seal:
Place the clear seal on the end of the selected hose connector.
-
Installation in wing nut:
Push the hose connector and seal together through the opening in the wing nut until they are tight.
-
Prepare the hose:
Briefly warm the end of the beer hose with warm water or hot air (not boiling) to make the material pliable.
-
Insert the grommet:
Insert the grommet firmly into the hose until it is completely seated.
-
Position the clamp:
Slide the 1-ear clamp over the area of the hose where the nozzle is visible.
-
Secure the clamp:
Use a suitable pair of pliers to squeeze the clamp shut securely.
Areas of application:
This set is ideal for use in the beverage industry, in dispensing systems, in brewery and event technology, and in hobby brewing. It ensures tight, hygienic, and durable hose connections with minimal installation effort.
Herstellerinformationen:
Gastrobedarf Westerbarkey GmbH
Schinkenstraße 10
33415 Verl
Nordrhein-Westfalen
Deutschland
kontakt@gastrodiscount.info
Für diesen Artikel sind laut Hersteller keine Warnhinweise und Sicherheitsinformationen erforderlich.
