Drawer cabinet with sliding doors 1500x700x850 mm with two basins on the right with edge welded on the right

Description

Drawer cabinet with sliding doors 1500x700x850 mm with two basins welded on the right with edging
H = 850 mm
made of stainless, ferritic steel
Edging at the rear, 40 mm height
firmly welded finish
Material thickness at least 1.2 mm, pelvis 1 mm
circumferential wool beach, 19 mm
Dropping surface grooved and reinforced with omega profiles
height-adjustable feet +25 mm to -4 mm
Table legs made of square profile 40x40 mm, material thickness: 1.2 mm
Delivery incl. Overflow tubes in 180 mm length and drain sieve
at table dimensions 1000 x 600 mm, 1000 x 700 mm and 1200 x 700 mm Basin centered
with basin left or right
Basin size 400 x 400 x 250 mm at tables with T = 600 mm
Basin size 400 x 500 x 250 mm for tables with T = 700 mm & B? 1100 mm
Basin dimensions 500 x 500 x 250 mm for tables with T = 700 mm & B>1100 mm
Sliding doors are double-walled, with continuous handle strips
Guide rail of the sliding doors made of stainless steel, with guide pins in the lower rail
Sliding doors run and hang on rollers
Wardrobe without rear wall
This product is produced for you
Delivery directly from work Stalgast (no pick-up in stock Verl possible)
Production time approx. 15 days with continuous handlebar
Guide rail of sliding doors made of stainless steel, with guide pins in the lower rail
Sliding doors run and hang on rollers
Cabinet housing without rear wall
This product is produced for you
Delivery directly from Werk Stalgast (no pick-up in stock Verl possible)
Production time approx. 15 days with continuous handlebar
Guide rail of sliding doors made of stainless steel, with guide pins in the lower rail
Sliding doors run and hang on rollers
Cabinet housing without rear wall
This product is produced for you
Delivery directly from Werk Stalgast (no pick-up in stock Verl possible)
Production time approx. 15 days