Corner piece for multi-counters with stainless steel surface

Description

The side parts of the stainless steel base are folded out using hinges. Then the work surface is placed on it but this time rotated by 180 °.
Now the bar top is inserted into the two hollow stainless steel bodies of the base . Now unfold the two wings. Finally, the output board is put on-ready.
Data sheet
< br />counter consisting of & nbsp; 4 parts
base frame & amp; Top made of stainless steel square tube
Side parts made of white or black aluminum Dibond (Master Bond, Basic), opaque
Counter boards made of PE500 plastic & nbsp; or Foamlite with aluminum substructure for reinforcement

• PE available in black / white marbled (standard), black or stracciatella (white with black fine dots)
  
• Foamlite available in black or white

& nbsp;
_ x000D_ The plates are food safe and unbreakable
thickness = 15mm, additionally supported with 30mm aluminum profiles
2 heavy-duty magnets, for better transport when the counter is folded< / p>
& nbsp; & nbsp; & nbsp; & nbsp; Dimensions:
& nbsp; & nbsp; & nbsp; & nbsp; Total width 850mm

• total height variant folding counter = 900mm
  
• total height variant long drink counter = 1315mm
  
• total depth 620mm
  
• Height from floor to work surface 900mm
  
• Height between work surface and counter board 380mm

Weight:
Work surface 2.9
Counter frame 12.7kg
Counter board 2.6kg
Weights:

• Work surface 21.2kg
  
• Counter frame 23.6kg
  
• Bar attachment 11, 9kg
  
• Counter board 10.8kg

& nbsp;
LED data
2 x LED RGB light boxes. Independently controllable.
Technical data:
RGB - LED strip
Operating voltage: DC 12V
Color: RGB (red, green, blue) Multicolor color mix
Beam angle: 120 °
IP65 protection against dust and splash water (LEDs embedded in silicone)
2 x remote control
15 colors + white Directly selectable
Dimmer with 8 brightness levels
Color change function
Flash function (white)
Last setting remains saved even after switching off
2 & nbsp; x power pack 5A
& nbsp;
GDW = 100% Made in Germany
< p>The counters are made in our factory in East Westphalia. Production only takes place after the order has been received, as many accessories have to be included in the production process.
For this reason, there are no stock items. The delivery time is usually around 14 days.
You are welcome to contact us by phone in advance.
& nbsp;
What is PE 500?
PE 500 is a high molecular weight polyethylene, which is characterized by good mechanical properties such as scratch and cut resistance and very good acid resistance. The material is used in various branches of industry such as the food and beverage industry or in medical technology. PE 500 is available in different colors for a wide range of applications, especially in mechanical engineering and in the food industry. Whether antistatic, electrically conductive, since PE 500 works exactly like wood, avoid direct sunlight over a longer period of time and storage at -5 ° or + 45 °. Please note that PE 500 consists of whole blocks is cut and therefore a S & auml; cut is always visible. We therefore recommend restless colors such as black / white & szlig; or Stracciatella.
& nbsp;
What is & nbsp; Foamlite?
< / u>Foamlite® P lightweight panels are almost 30 percent lighter than comparable panels while at the same time offering high mechanical stability.
UV-resistant. Grained surface with high scratch resistance.