Copy GDW long drink bar 1,25m steel PE 500 1,5m Fronten Weiß

Item number: 31117

659,00 € 769,00 €

including 19% VAT. , plus shipping (Speditionversand)


Shipping time: 5 - 9 workdays


GDW multi-counter 1,25m

Long drink counter and folding counter in one

Use this stainless steel counter as a normal folding counter / counter with 90cm height or as a long drink counter / bar counter with bar attachment at a total height of 135cm

ideal as a DJ desk or counter

  • built up in seconds
  • low weight
  • Space-saving storage through folding system
  • light advertising attachment



To build

Variant folding counter
The side parts of the stainless steel base are folded out by means of hinges. Then the worktop is laid on top.


Variation long drink counter

The side parts of the stainless steel underframe are folded out by means of hinges. Then the work surface is put on but this time turned by 180 °.

Now the bar attachment is inserted into the two stainless steel hollow bodies of the undercarriage. Now unfold the two wings. Finally, the output board is laid-ready.

data sheet

Counter consisting of 3 parts
Base made of stainless steel square tube

Counter fronts and sides in white Alu-Dibond (Master Bond, Basic), opaque
Counter boards made of PE500 plastic

Available in black / white marbled (standard), black or stracciatella (white with black, fine dots)

The plates are food safe and unbreakable
Thickness = 15mm, additionally supported with 30mm aluminum profiles
2 heavy-duty magnets, for better transport with folded counter

Total width 1250mm

  • Total height variant folding counter = 900mm
  • Total height variation Longdrink counter = 1235mm
  • Total depth 620mm
  • Counter top board 1250mmx300mm
  • Working surface 1250x600mm
  • Height from floor to work surface 900mm
  • Height between work surface and counter board 330mm



  • Working area 15,7kg
  • Counter rack 16,6kg
  • Bar attachment 8kg
  • Counter board 7,9kg


Please select your accessory / thumbnail left * (descriptions see below)

In our shop, we have other items ready for you such as

· Digital printing
· Transport boxes
· Sinks, drip plates & mixer taps




GDW = 100% Made in Germany

The counters are made in our factory in East Westphalia. Production takes place only after receipt of order, as many accessories must be included in the production process.

For this reason, there are no stock items. The delivery time is usually around 14 days.

You are welcome to contact us in advance by phone.


What is PE 500?

PE 500 is a high-molecular-weight polyethylene with good mechanical properties such as scratch and cutting resistance and very good acid resistance. The material is used in various industries such as the food and beverage industry or in medical technology. PE 500 is available in different colors for a variety of applications, especially in mechanical engineering and in the food industry. Whether antistatic, electrically conductive, as PE 500 works just like wood, you avoid direct sunlight over a longer period of time as well as storage at -5 ° or + 45 °

Description counter accessories

Height-adjustable feet
suitable for all counters
Price is for a set of 4 pieces per counter
Material: Plastic

counter connector
for fastening several counters to each other
including 2 x laser hole, screw and nut
suitable for all counters

Intermediate floor for bar counters 1.25m or beer counters 1.25, 1.5m or 2m
Intermediate bottom of screen printing plates
2 rails made of stainless steel
Thickness 15mm
Color: brown
Rough on one side
Reinforced with aluminum profiles
Unless otherwise stated, the plate is installed halfway up to the work surface
If you have ordered different counters, so please tell us which counters are equipped with the false bottom
The attachment is made by means of two stainless steel rails which are mounted on the inner side of the respective counter wing in existing slots. Now the plate with the underlying U-profiles is hung in the stainless steel rails

Floor fixing for counters
for attachment by means of screws eg to tent floors etc.
suitable for all counters
Price is for 2x pieces
Material: stainless steel

Extra charge for a set of aluminum Dibont plates in black matt instead of the white standard plates
The material thickness thus increases by one millimeter
The price is for a front panel and 2 side plates for all counter models

Curtain for folding counters
Color: Black
Height: approx. 700mm
Length: bar length + 1/3
Washable at 30 °
Including Einläufiger curtain rail and stopper
Suitable for all GDW folding counters or longdrinking counters (except counters with CNS surface)
If the curtains belong to an active order, they will be attached automatically by us
Available for the following counter lengths: 1.25m, 1.5m or 2m

RGB LED Strip Complete + Controller + Transformer
NEW: The LED strip is now pushed into an aluminum cable channel. The channel mounted below the front of the counter is equipped with an opal disc. This creates a much smoother lighting environment.
When ordering more than one counter, these are equipped with cable channels for series connection.
Technical specifications:
RGB - LED strip
Operating voltage: DC 12V
Color: RGB (red, green, blue) Multicolor color mixing
Beam angle: 120 °
IP65 dust and splash protection (LEDs embedded in silicone)
remote Control
15 colors + white directly selectable
Dimmer with 8 brightness levels
Color sequencing
Flash function (white)
Last setting is saved even after switching off
power adapter

High quality LED work light for longdrinking counters
Ideal for illuminating the entire work area
1.5 longdrink counter = 8 x 3 high tech leds
1.25 Longdrinking Counter = 6 x 3 High Tech Leds
Longdrinkecke = 2 x 3er High Tech Leds
The LEDs are located below the PE output surface
Including 1 adapter for standard power supplies and cable duct
DC12V power supply (230V / 50Hz)

Circumferential milling edge as a drip tray
Possible for all GDW counters whether folding counter or long drink counters
Milling depth 5 mm
Milling width10 mm Milling distance to the edge 50 mm
Corner milling rounded off
without expiry
Price is for one counter
If the milling edge should also be desired in the output area for long drink counters, then this article must be put into the shopping cart twice
Note: The cutting distance for longboard counters is only 20 mm

Powder coating in desired color
Powder coating of the stainless steel frames in your desired color eg black or white
The price is per counter
Delivery time about 3 weeks

Bags for counters
Ideal for protecting our GDW counters during transport.
All pockets are sewn on 3 sides and have a Velcro closure on top
Made of durable needle felt.
Available for each single plate made of PE 500 or as a set incl. Under-pocket.
without carrying handles